10 steps of handmade sink making machine

How does handmade sink machine work?

1.304 stainless steel 304 raw material is different from the raw material of the heat sink. The practical raw material of the handmade sink is 1.2MM thick, and it has been processed only by drawing and punching

2. Bending, handmade sink does not need to be stretched, does not need to be overheated, does not damage the overall thickness and structure of the forming tank, and protects the original quality of 304 stainless steel. The first process of the handmade sink is to be bended to 90 degrees angle, after the subsequent process, using Mugold-207B box R corner welding machine to weld.

3.Welding, before welding, the gaps after bending must be manually butt-jointed, and then welding by R corner welding machine, after the computer welding, the quality needs to be fully picked to ensure that each For the quality of this sink, good welding is best based on the appearance of white oxidation lines, it is also a unique identification mark for high-quality handmade sink machine.

4.Welding.A large amount of manual welding, side seam welding, snap spot welding, R angle spot welding, each welding requires the rich experience and careful operation of the spot welder to ensure the quality of welding.

5.Grinding.Sink grinding machine VS manual polishing, Polishing of handmade sink is mainly to re-beautify the welding marks generated by handmade sink edge welding machine, so that it can flatten surface and straight drawing lines.

6.Belt sanding drawing machine. Over-belt is used to deal with the oxidation lines and welding marks on the central surface of the water tank when edge welding machine welded the double grooves. The straight line grinding of the welding marks can make the welding marks disappear and reproduce the beautiful straight wire drawing Lines by handmade sink drawing machine.

7.Polishing Machine, Using automatic handmade sink polishing machine, surface will be more bright and shiny.

8. Spraying. The spraying material used for handmade sink spraying is different from the stretching sink, sprayed the thickness is thin and the flatness is good, just dry naturally. The common point is that they are all used environmentally friendly, nail-free and odor-free water-based spray materials.

9.Quality Inspection handmade sink focuses on the perfection of every detail. After each step is completed, there will be relevant quality inspectors to check. Our staff pays attention to every detail and has always believed.

10.Package, each sink into a poly bag, then packed into cartons, completion of handmade sink production. For more info, welcome to discuss with us by Whatapp& Wecaht: +86 13926078553 Email : sales01@jmfrd.com